POWER - KLEEN CI
Parts Washer Corrision Inhibitor
Power-Kleen CI is 100% active corrosion inhibitor chemical for use in all aqueous parts washers. Excellent for parts washer cleaning applications to prevent rust and corrosion. Excellent in parts cleaning applications not requiring detergents or where normal detergents may cause excessive foam due to different types of greases or soils but still need to maintain the pH to prevent corrosion inside the mild steel parts washer cabinet. Leaves parts with rust preventative coating after washing.
ADVANTAGES of Parts Washer Corrosion inhibitor
-
High rinseability provides complete chemical removal with no staining or residues.
-
Corrosion Inhibitor contains no metallic compounds such as chromate or zinc.
-
No foaming in the parts washer from rust inhibitor
-
Contains no silicone to interfere with new coatings or paint.
-
Formulated with rust preventative to protect your parts washer & non-rinsed parts including Ferrous Metals, Copper, and Aluminum from corrosion and rust.
PHYSICAL PROPERTIES of Corrosion Inhibitor for Aqueous Parts Washer
Form: Stick
Color: Pinkish Blue
pH (use dilution) 10.9
Storage Stability Excellent
CHEMICAL MIXING INSTRUCTIONS
For MART Power Washers and StingRay Parts Washers, heat the water to at least 160 degrees. Mixing rate of 0.8 per gallon for powder (30-8 oz sticks 15 lbs, will treat approximately 300 gallons) at 1200 ppm - NO2 (Nitrite). Carefully distribute 8 oz (1 stick) of inhibitor per 10 gallons of water, on the drip pan, beneath the turntable in the StingRay Parts Washer or MART Power Washer. For all other cleaning equipment, add chemical carefully and as instructed by the aqueous parts washer manufacturer. Avoid “dumping” of chemical directly into parts washer reservoir. Operate the wash cycle at 160 to 190 degrees F, to distribute chemical and mix into solution. Avoid contact with chemical and solution.
CORROSION INHIBITOR PACKAGING
Part Number |
Package Size |
22134 |
15 lbs sticks |
85208 |
50 lbs Powder |
85209 |
400 lbs Powder |
Shipping: Power Kleen Corrosion Inhibitor Ships UPS or Truck, Next day Available
HEALTH AND SAFETY
Avoid contact with chemical and solution. Avoid inhaling fumes. Instructions can also be found on the Power-Kleen CI label, MART Tech Services Website or reference the MART Power Washer Operating Manual. Get the most recent MSDS from our website at www.marttechservices.com or call MART Tech Services.
Power-Kleen CI Parts Washer Corrosion Inhibitor Technical Data Sheet
Additional Related Chemicals
Power Kleen Defoamant "A"
Power Kleen Rust Inhibitor
Power Kleen Titration Test Kit
|