Parts Washer Chemicals - Specification Sheets -Power Kleen II Detergent

Highly Concentrated, Low Foaming Detergent Safe for
Aluminum, Iron, Steel, and Multi-metals  

 GENERAL DESCRIPTION

Power-Kleen II is a 100% active concentrated cleaner designed specifically for high pressure & high temperature spray washing of Aluminum, Iron, Steel, Brass and other-metals. The powerful cleaning action becomes more effective at higher temperatures. It is safe for use on all metals and requires no extra steps for most applications.  Power Kleen II is best used in a cleaning application where the most powerful cleaning action is desired and different types of metals will be cleaned in the same washer.

 ADVANTAGES

• Effectively attacks oil, greases, scale, rust, paint, carbon soils, brake dust, and other soils

• 100% Active Concentrated chemical with no fillers

• Does not break down under high temperature and high pressure.

• Formula includes rust inhibitors to protect your washer & unrinsed parts

• Built-in defoamant reduces need for separate anti-foam and reduces your total chemical needs.     

 APPLICATION GUIDELINES

Power-Kleen II is designed for use at low concentrations:

• Washing light soils                        3.0 oz/gal to   5.0 oz/gal
• Washing heavier soils                   6.0 oz/gal to 10.0 oz/gal          
• Useable temperature range 150° - 210º. Higher temperatures increase effectiveness.

PHYSICAL PROPERTIES (TYPICAL DATA)           

Form.............................................................Powder          pH range of Working Solution..................11.5-12
Color (concentrate) ...................................... White         pH of concentrate.................................................12
Base.......................................Sodium Metasilicate

MIXING INSTRUCTIONS

For MART Power Washers: Heat the water to at least 160ºF. Open and secure the Power Washer door. Carefully distribute ½ to 8 oz of detergent per gallon of water on the drip pan beneath the turntable in the washer. Close the washer door and start the pump to dissolve the detergent.
For all other cleaning equipment: Add chemical carefully and as instructed by the machine manufacturer. Avoid “dumping” of chemical directly into washer reservoir. Violent exothermic (heat released) reactions, splashing of heated chemical solutions and the premature release of fumes may occur. If chemical must be added to the solution, slowly pour chemical into solution while continuously mixing.

HEALTH AND SAFETY

Avoid contact with chemical and solution. Avoid inhaling dust and fumes. Wear eye protection and gloves when handling chemicals. Instructions can also be found on the Power-Kleen I label, MART Tech Services Website or reference the MART Power Washer Operating Manual.
Get the most recent Power-Kleen II MSDS

 PACKAGING

Shipping: UPS, LTL Freight Carrier

Power-Kleen II Technical Data Sheet

SOLUTION MONITORING

	Power-Kleen Titration Test Guide
	Recommended initial Chemical Charge for Power Washer
	Chemical Concentration Calculator

Power Kleen II Printer Version PDF

Additional Related Chemicals

Power Kleen Defoamant "A"

Power Kleen Rust Inhibitor

Power Kleen Titration Test Kit

Mart Tech Services
2450 Adie Road, Suite 100
Maryland Heights, MO 63043

Phone: (314) 567-3705
Fax: (314) 567-6318
Toll Free: (800) 543-6278
Email: marct@martwash.com