STINGRAY Parts Washer Repair Parts, Replacement Parts

Maintenance Items « Return to All Parts

 

Description

Part Number

 

NOZZLES: 316 Stainless Steel NPT threaded Precision Stingray Parts Washer Wash Nozzles -

Standard Wash Nozzle 8.0 GPM 25 Degree
Wash Nozzle 8.0 GPM 40 Degree
Wash Nozzle 8.0 GPM 15 Degree
Wash Nozzle 8.0 GPM 0 Degree
Standard Rinse Nozzle 0.5 GPM 45 Degree
OEM parts on StingRay Parts Washer
Other sizes available - Please call for Part number




29000
29030
28950
28930
29010


Grease
Lubriplate #1444 -
StingRay specified grease For all "Wetted" bearings inside the parts washer, highly resistant to wash out. Outperformed all other greases by a wide margin in testing performed by MART Engineers.  Don't risk ruining your bearings using an inferior grease.  Get the tested and approved OEM Lubriplate 1444.
Sold by the tube, a case is 10 tubes
 

Lubriplate 1444 Data sheet


51810

Pump Suction Filter

The Power Washer pump Suction Filter Screen allows solution in to your pump, but stops large items that may damage your pump or clog the wash nozzles. We can provide you with a special size and material for your machine design. We stock the standard carbon steel 32x7x12 filter for all Stingray Parts washers.

61001


Rust Inhibitor                  5 gallon

Steel, Iron or yellow metal parts
Provides rust protection for
short-term storage of parts after cleaning
 

Injector Pump to Inject chemical into rinse water easily retro fits to any StingRay Parts Washer.
 

52837

Defoamer

Defoamer
                Defoamant A 1 gallon
                Defoamant A 5 gallon
                Defoamant A 4 x 1 gallon case

Compatible with all Power Kleen detergents and cleaners.
Reduces foam in spray cabinet washers that produce excessive foam.
Non-Silicone
 

 
52789
52790
52791

Rust Remover

Rust Buster               5 gallon

Strips rust from inside of parts washer cabinet to revive rusted and corroded surfaces.
 

85010

Power Kleen I  Parts Washer Cleaner
                                    50 pound Pail
                                  400 pound Drum

 
52783
52784

Power Kleen lI  Parts Washer Cleaner
                                    50 pound Pail
                                  400 pound Drum
 

 
52785
52786

Power Kleen llIL  Parts Washer Cleaner
                                     5 gallon Pail
                                   55 gallon Drum

 
52795
52796

titration kit

Titration Kits
                                   Power Kleen I
                                   Power Kleen II
                                   Power Kleen IIIL

Control your chemical costs and Maintain your chemical concentration with our easy to use Titration kits.
 

 
22200
22201
22203

pH test paper

pH Paper Test Kit 6.5 to 13 range

Excellent method to determine proper pH range of your chemical solution in all parts washer baths.  Solution pH should be above 10.5 in your parts washer to prevent corrosion.

85006

suction filter brush 

Filter Brush
A must have item to clean the MART or StingRay Washer suction filter on a daily basis

85005

Solution Transfer Pump and Cart

72339

       amp meter

Amp Probe and Voltage Meter

Ideal for StingRay Parts Washer
Industrial strength Fluke meter

AC
Amps Range: 0-400A; 50-60 Hz; AC Voltage Range: 0--600V Ohms Range: 0-400 Ohms; Continuity:

 

85003

SAE Tool Kit

Tool Kit
SAE TOOL KIT  for StingRay Parts Washer with case.  Includes US sized sockets, wrenches, Allen wrenches, pliers and screwdrivers for most maintenance and repairs. Recommended for all non-US washer installations.

85001

safety equipment

StingRay Tech Services  recommended Safety Equipment for Parts Washer Operators

Keep your Parts Washer operators safe with the proper protective Full Face Shield, Thermally protected elbow length gauntlet style neoprene gloves and chemical/acid 45 mil PVC apron

Special Kit Price

89008

Sludge and solution pump cart with hoses for all styles of Parts Washers

Ideal solution management and clean out sludge pump for your industrial parts washer. Air operated 2" flap valve diaphragm pump won't clog.  Heavy duty chemical rated quick latch hoses resist heat and chemical.FLAP valve diaphragm pumps are designed to pump sludge, mud, slurry, sewage and other thick liquids that have the ability to flow. Excellent suction and pumping ability for thick heavy slurries and is self priming. Includes 2 - 15' Cam lock hoses and cart with casters.

Additional Hoses 15' length with
cam lock fittings each end.

Pump
71356

Hose
52683

Belt Tension Checker

Belt Tensioner
Properly Adjust the tension on the MART and StingRay Washer  50Hz belt drive Pumps with this easy to use device

85000

Grease Gun

Grease Gun
StingRay Tech Services - Recommended for parts washer pump and bearings with calibrated discharge rate per stroke
.  Pumps twice as much grease per stroke as a standard grease gun.

85071

        MART Touch up paint

Touch-Up Paint StingRay Blue
12 oz spray can, fast dry


Keep your StingRay Parts Washer looking great with this OEM paint color

85002

Training Video - Basic Operator Training
for StingRay Power Washers

For less than half the price of a service call your operators can learn the proper methods for using and maintaining your StingRay Washer and you can use it over and over, again and again.

Check out the Video Sample

89000

 

 

 

If you don't see what you need in this list, please call or email us.  We have everything you need for your StingRay Parts Washer.

| Back to Top |



Home | Product Registration | Site Map
Spare/Repair Parts | Maintenance | Chemicals | Training | Titration | Rebuilds/Retrofits
Training/Startup | Support | FAQ | Warranty Service | Contact Us | Location | Feedback

 

StingRay Tech Services
2450 Adie Road, Suite 100
Maryland Heights, MO 63043

Phone: (314) 567-3705
Fax: (314) 567-6318
Toll Free: (800) 543-6278
Email: service@marttechservices.com