|
Six Reasons to Use Power-Kleen Detergents
Your choice of detergent is critical to obtaining the best possible cleaning results,
the lowest operating cost and the longest life of your JRI, MART, Proceco, StingRay,
and Better Engineering Parts Washer.
-
Best Possible Cleaning Results
-
Lower Parts Washer Operating Costs
-
Longer Parts Washer Life
-
Environmentally Friendly
-
Expert Knowledgeable Support Staff
-
Wide Selection of Detergents
|
 |
-
Power-Kleen Advanced cleaning detergents are designed specifically for high-pressure high-temperature cleaning in MART / Proceco / JRI / Better Engineering / StingRay Parts Washers. You have to see the grease-busting power to believe it. The powerful cleaning action becomes more effective as the temperature increases and the chemical does not break down under high temperature and pressure. Inferior detergents decompose and form precipitates. Precipitates are bad news. They form deposits on heat exchangers and other parts in your Aqueous Parts Washer. Heavy deposits on the heat exchanger make it difficult to heat the solution and can burn out your heat exchanger.
-
Power-Kleen chemicals are 100% active and concentrated to tackle the toughest grease and grime. Designed to blend with water in ratios up to 1 part of detergent to 64 parts of water. Maximum Strength Power-Kleen detergents, when compared to the economy brands gives you much more “bang for your buck” because you use less chemicals and the chemicals last longer. Economy detergents use “fillers” that drop-out as waste in the bottom of your parts washer reservoir. You pay for these fillers twice, once to buy them and again to have them hauled off as waste. Power–Kleen liquid detergents in 5 gallon pails or 55 gallon drums and Power-Kleen Ultra Powder detergents in 50 pound pails or 450 pound drums are economically packaged.
-
Inferior “economy” detergents can damage your Aqueous Parts Washer and ultimately cost  you money in repair and maintenance. Economy detergents allow lime and soap build-up inside your parts washer. The result is increased maintenance costs, reduced cleaning performance and shorter parts washer life. The powerful, activated, special additives in Power-Kleen fight stains and work to prevent buildup. Additional corrosion inhibitors not only protect your parts washer cabinet but also help protect the metal surfaces of the parts you wash against corrosion.
-
Innovative Power-Kleen Chemicals are safe for your parts washing equipment and personnel. They are easier to handle and have no unpleasant odors like many low cost detergents. OSHA Material Safety Data Sheets are available for all Power-Kleen detergents.
-
Our Tech Services people are knowledgeable about hundreds of applications just like yours. They know what works and what doesn’t. Our Cleaning-System Specialists save you time and mistakes by applying our extensive, field tested experience to your needs. We will match an optimum detergent to your specific cleaning process to meet your specific parts washing needs. We are always available to assist you in tough cleaning applications. Use our toll free number or visit our Website where you will find tons of information on chemicals, titration and parts cleaning.
-
Get the most from every wash load with our wide selection of Deep Metal Cleaning detergents. All Power-Kleen detergents have water softeners and wetting agents built-in, for fast action in virtually any water condition. The corrosion-inhibiting additives work to protect metal surfaces long after the washing is completed.
|
