Description

MART Part Number

MART Gas Burners and all burner Repair parts Original Equipment specified on MART Parts Washers

40 Series Burner System replaces all MART Cyclone 30 & MART Tornado 40 burners with a World Class high efficiency burner. Natural Gas or Propane

Please call for MART part numbers.

71650

Gas Burner Controller module for MART

Call with burner type

Call

Gas Burner Combination valve
OEM replacement parts for MART Washer

Please call and specify gas burner brand

Call

Gas Burner Flame sensing rod

MART OEM replacement part.

Please call and specify gas burner brand

Call

Gas Pressure Regulator for Gas Burners. All sizes and ranges available for new installations to regulate pressure to appropriate amount for gas burner installation. 7 PSI to 12 wci.

Specify pressure & flow rate or gas burner size.
OEM replacement parts for MART Washer.

Heating Elements MART Washer.
Specify Voltage and Kilowatts required.
OEM replacement parts for MART Washer.

Screw Plug Immersion Heating Elements for direct heating of liquids. Includes Moisture Resistant NEMA 12 terminal enclosure with gasketed cover. Standard NPT 2 1/2 inch screw plug configuration. Watt density rated for Parts Washing solution with highly corrosion resistant Incoloy sheath.

208, 240, 380, 460 VAC
7.5 kW, 15 kW,and 20 kW size parts in stock.

Temperature Gage and thermometer.

Measures temperature of the wash solution. Calibrated in 2 degree increments with maximum scale reading of 220 degrees.

Thermocouple Probe and housing for standard MART Washer,

NEMA 12 Oil Tight construction,  Thermocouple type matched to temperature controller in control panel
Stainless steel heavy duty sheath 

Temperature Controller MART Washer

MART Washer Heating System Electronic Temperature Controller, 0-300 Degree F for attachment to thermocouple. Plug in pins for socket base.

High-Temperature Sealant

This mica-based putty Bonds, Seals, and Fills. The non-flammable Adhesive & Sealant Putty withstands temperatures from -100 to +2350 F. Use for gas burner installation to seal flanges, mounting surfaces, flue exhaust systems, and furnace fire boxes. Resists most acids, solvents, and corrosives.

Starts to set-up in 20 minutes; with full cure in 24-48 hours. Gray color.
11-oz. cartridge for use in a standard caulk gun.

Steam Heat Exchanger MART Washer.

OEM replacement steam coil for MART Washer steam heating System. Factory tested and inspected. Available in 14 gage Carbon Steel or Corrosion resistant 16 gage 304 Stainless Steel. Heavier gages available. Specify Height and Width (AxB)

If you don't see what you need in this list, please call or email us.  We have everything you need for your MART Power Washer.

| Back to Top |